Products for sale

Here you will find various products that may help to alleviate some of the symptoms or inconveniences from different forms of electronic harassment.

Product	Description	Notes	Price
Detector1	EMF/EMI hazardous field detector. Detects at 3dB increments, total of 30dB, 10 LED indicators. 3.25" X 5.5" X .75" plastic enclosure, requires 9V battery. Detects RF, EMF, ELF, Microwave, HERF & EMP.	free s/h	$55.00 each
WaveShield® Paint	There is nothing like it anywhere except here. WaveShield was developed by Spectrum for victims and those who want to be safe from Electronic harassment and exposure to unsafe levels of various forms of radiation. Made using a special paint base which is water, gasoline, chemical and weather resistant once dry. We then add and isolate special spherically atomized metal particles and carbon. WaveShield is capable of reflecting, absorbing and redirecting EMF, RF, Microwave, Thermal imaging, Heat waves, sound waves and many other forms of electromagnetic radiation. View our test results by clicking here.	Will ship via UPS please call for a shipping quote 760-967-8299 call for larger qty purchase discounts	$100 gallon or $400 5gals
TriField ^® Broadband Meter $145.00 Free Shipping in Cont. United States	Please do not confuse this with the regular Trifield meter on the market. The TriField ^® Broadband Meter combines all the features needed for fast, accurate measurements of electromagnetic fields. It independently measures electric field and magnetic field, and is properly scaled to indicate the full magnitude of currents produced by each type of field inside a conductive body. As a result, it "sees" much more than any other electromagnetic pollution meter. Depending on where the knob is set, the meter detects either frequency- weighted magnetic fields (two separate scales), or frequency-weighted electric fields in the ELF and VLF range. It detects electric fields from power line frequencies up through 2.5 GHz. This fills in the gap from 100 KHz to 50 MHz, which includes many amateur radio frequencies so that antenna radiation patterns can be measured. The Broadband detects magnetic fields up through 100 KHz, as does the standard TriField meter. The AC magnetic section is identical to that of the standard TriField Meter and has several uses. It can detect which of several wires or transformers is carrying current, and help determine appropriate placement of magnetically sensitive equipment. It can also help to reduce personal exposure to fields. Most users prefer a magnetic section which is frequency-weighted, and calibrated at 60 Hz. However, a flat frequency response version (50 Hz to 500 Hz) is also available for the AC magnetic section. This is the same price as the regular frequency-weighted version (which has sensitivity proportional to frequency from 50 Hz to 500 Hz.) The AC electric section is also identical to that of the standard TriField Meter and can be used to determine whether an AC line is hot or neutral, even through a wall. It can easily detect by proximity which side of a wall outlet or which wire of an extension cord is hot. It can also detect improper grounding, as well as the extensive electric fields from video monitors and fluorescent lights. The radio/microwave section detects vertical electric fields parallel to the long axis of the meter. Range is 10V/m to 1 KV/m (0.026 mW/cm² to 260 mW/cm²) and is frequency-flat from 100 KHz to 2.5 GHz. Accuracy is +/-30%. It is used to detect ON-AIR status of transmitters (or to detect concealed transmitters), to check microwave ovens or other microwave equipment for leakage, and to look for RFI sources. For radio waves, magnetic field strength is proportional to electric field strength. Therefore only electric or magnetic need be measured. In a radio wave, one milligauss corresponds to 30 volts per meter, which are the RMS magnetic and electric fields for a power density of 0.24 milliwatt/cm². The power density increases as the square of the field strength, and the field strength decreases as the inverse distance from the transmitting antenna. This meter is the only one which combines magnetic, electric, and radio/microwave detectors in one package, so that the entire nonionizing electromagnetic spectrum is covered. In addition, the magnetic setting and the electric setting measure true magnitude.
Measures: 2.25" W X 2.25" H X 4.25" Long Weight: 8 ounces with battery included. Instructions included.

For more information or to order products please email us at siin@siin.com or send your order with payment to:

Payment may be in the form of: Personal Check, Money Order, Cash or Travelers Check.